Roofing in Deerfield Beach, FL

Because salt air is corrosive and the sea breeze carries it well past the beach. Fasteners, drip edge, valley metal and vent flashing all degrade faster here than in western Broward, and once that metal goes the covering above it starts to move. We specify corrosion-resistant hardware on coastal properties so the metal lasts as long as the tile or shingle sitting on it.

Yes. There is a lot of low-slope roofing in this city, on villa and condominium buildings and on the flat additions over Florida rooms and carports. We install membrane and modified bitumen systems, and because we hold a state building license alongside the roofing license, association and commercial work stays with one contractor from start to final inspection.

The same way as a house, with more coordination. We measure every building, hand the board one written price broken out per building, and plan the sequence so parking, walkways and access stay usable while work runs. Permits go in under CCC1337306 and CBC1266379 with the fees already included, and we carry the job through the final inspection.

Published pricing starts at $6.00 per square foot for architectural shingle, $10.25 for tile and $10.75 for metal, with permits and permit fees included. Coastal detailing, pitch, access and deck condition all affect the final figure, which we confirm at the free on-site measurement. If you hold a lower written estimate from a licensed contractor, we will beat it.

Yes. Deerfield Beach sits inside our normal Broward service area, from the barrier strip and The Cove west through Crystal Lake, Century Village East, Deer Creek and the Villages of Hillsboro. Our office is at 1118 N 46 Terrace in Hollywood, the same county, and you can reach us on 954-893-2550 to book the free measurement.